A premium quality gear oil for transmissions and final drives.
GL-5FullSynthetic and Synthetic Blend Gear Oils A premium quality gear oil for transmissions and final drives. Meets the toughest industry specifications for automotive extreme pressures (EP) gear lubricants including limited slip differentials. Designed for extreme pressure| offset spiral bevel and hypoid gear sets (ring and pinion gears) in heavy-duty trucks| farm| logging and construction machinery. Suitable for extended drain intervals. AVAILABLE IN: Full Synthetic 75W90 and 75W140| Synthetic Blend 80W90 and 80W140 Synthetic base stocks maximize oxidation resistance Greater film strength at higher operating temperatures Reduced wear at start-up and ease of start-up even in arctic conditions Extreme pressure additives prevent gear scuffing and scoring Prevents formation of rust and sludge throughout the system Fortified to prevent chatter in limited slip synchromesh drive trains Excellent resistance to foaming Extended drain intervals versus conventional products GL-5 Gear Oils A premium quality multi-purpose gear lubricant which provides superior performance that is obtained through the use of quality base oils and a select extreme pressure additive system. These additives impart anti-weld| anti-scuff and anti-wear properties that are necessary in heavy-duty service gear lubricants. GL-5 Gear Oils provide excellent protection under the most severe conditions encountered in commercial transmissions| axles and final drives. GL-5 Gear Oils are designed to be used in limited slip differentials. AVAILABLE IN: 80W90 and 85W140 For use in limited slip differentials Excellent for heavy equipment applications with higher performance demands on the drive train lubricants Exceptional reliability in today’s drive train applications as well as in the older models Provides high thermal stability as well as oxidation resistance Protects against low speed high torque wear Excellent fluidity in low temperatures which reduces wear during start-up Improved lubrication and extended seal life due to good foam control GL-1 Gear Oils Manufactured with high quality base stocks to provide outstanding oxidation stability for long service life. This oil is inhibited against foaming and does not contribute to corrosion or wear of yellow metals| such as brass or bronze. GL-1 Gear Oil meets API designation GL-1. AVAILABLE IN: SAE 90| 140 and 250 Long service life Non-foaming Non-corrosive GL-5 FULL SYNTHETIC AND SEMI SYNTHETIC 75W90 Full Synthetic GL-5-RB-FS-75-90 12 x 1 York Bottle/Case 75W140 Full Synthetic GL-5-RB-FS-75-140 12 x 1 York Bottle/Case 75W90 Synthetic Blend GL-5-75-90SYN-QT 12 x 1 Quart/Case 75W140 Synthetic Blend GL-5-75-140SYN-QT 12 x 1 Quart/Case 80W90 Synthetic Blend GL-5-RB-SB-80-90 12 x 1 York Bottle/Case GL-5-RB-SB-80-90-5GP 1 x 5 Gallon Pail GL-5-RB-SB-80-90-55GL 1 x 55 Gallon Drum GL-5 SEMI-SYNTHETIC 80W90 GL-5-SB-80-90-55GL 1 x 55 Gallon Drum GL-5-SB-80-90-5GP 1 x 5 Gallon Pail GL-5 GEAR OILS 80W90 GL-5-RB-80-90 12 x 1 York Bottle/Case GL-5-80-90-QT 12 x 1 Quart/Case GL-5-80-90-5GP 1 x 5 Gallon Pail GL-5-80-90-55GL 1 x 55 Gallon Drum 85W140 GL-5-RB-85-140 12 x 1 York Bottle/Case GL-5-85-140-QT 12 x 1 Quart/Case GL-5-85-140-GL 3 x 1 Gallon/Case GL-5-85-140-5GP 1 x 5 Gallon Pail GL-5-85-140-55GL 1 x 55 Gallon Drum GL-1 GEAR OILS 90 GL-1-90-QT 12 x 1 Quart/Case GL-1-90-5GP 1 x 5 Gallon Pail 140 GL-1-140-1QT 12 x 1 Quart/Case GL-1-140-GL 3 x 1 Gallon/Case GL-1-140-5GP 1 x 5 Gallon Pail 250 GL-1-250-GL 3 x 1 Gallon/Case GL-1-250-5GP 1 x 5 Gallon Pail PLEASE NOTE: A limited selection of listed ABRO lubricants is available in ABRO’s Savannah Warehouse. Direct shipments from factory will require minimum quantities. Please contact your ABRO sales representative to check for availability and minimum quantities before placing orders. ABRO’s representatives can also assist you to determine which lubricant is best for your market| including lubricants not listed in this catalog.